Important French silver repeating coach watch Circa 1808
- Kenmerk
- DB1072
- Diameter
- 113 mm
- Estimate
- € 35.000 - 70.000
- Price sold
- € 41.250
Silver cylinder coach watch
–
An important French silver open faced quarter repeating coach watch made by Abraham Louis Breguet, circa 1808. Sold to Jérôme Bonaparte on July 13th, 1808. The key wind full plate movement fitted with two hammers, chain and fusee, a ruby cylinder escapement in hanging arrangement, parachute shock protection and a three arm brass balance. White enamel dial with Roman hours, an outer minute track and blued Breguet hands. The smooth case with a later bottom bell and cord for the repetition. Movement signed and numbered, case numbered twice, one number matching that of the movement.
–
Diameter: 113 mm
–
Weight: 910 g
–
Signed: Breguet
–
During his lifetime, Breguet manufactured and sold only ten coach watches. This is the only remaining piece he made in his style and the style of its conception.
–
Of Breguet’s ten coach watches, at least six are made with verge escapements in the traditional 18th century style. One, No. 534, had an escapement of an unknown type and three had Breguet’s signature ruby cylinder escapement, which was considered particularly innovative at the time. Today all but one watch is missing. The present clock is the only remaining known example with a ruby cylinder escapement.
–
In the last 15 years, only two Breguet coach watches have been offered at auction: No. 248, sold by Sotheby’s London on April 1st, 2009 for GBP 37,250 and No. 1155, sold by Dr Crott on May 6th, 2017, for EUR 42,500. Both were equipped with verge escapements.
–
As is typical for all coach watches, this timepiece has a quarter hour repeater. It also features a bracket located at 6 o’clock to attach the clock to the coach from both the top and bottom. In order to safely survive the bumpy carriage rides, the watch is equipped with Breguet’s precise ruby cylinder escapement and a parachute shock protection, the escape wheel is set with rubies and also has a kind of cover. These cover stone slabs are flat and lie on the bearing stones in which the axes move. They support the pins of the axes when the clock is in a horizontal position. These are placed in an eight shaped plate near the smallest point to ensure that if the oil were to leak, it would still remain in the middle and not completely drain out. Breguet initiated the use of this system, which was adopted by top watch manufacturers such as Patek Philippe for high end watches.
–
The Breguet archives record that this watch was sold to Jérôme Bonaparte, King of Westphalia, on July 13th, 1808. Jérôme Bonaparte (1784-1860) was Napoleon Bonaparte’s youngest brother and king of the Kingdom of Westphalia from 1807 to 1813. His official royal name there was Jérôme Napoleon or Hieronymus Napoleon.
Signed: Breguet








































